KINGSTON
KINGSTON
Sort by
Show result

✅Features
-Low-profile heat spreader design
-Cost-efficient, high-performance DDR4 upgrade
-Intel XMP-ready
-Ready for AMD Ryzen™
-Speeds up to 3733MHz1 and kit capacity up to 128GB
-Plug N Play functionality at 2666MHz1

RM0.00

✅ Improved stablility for overclocking
✅ Increased efficiency
✅ Intel XMP 3.0-Ready and Certified
✅ Plug N Play at 4800MHz
✅ Low-profile heat spreader design

RM179.00

✅ Enhanced RGB lighting with new heat spreader design
✅ Patented Kingston FURY Infrared Sync Technology
✅ Intel XMP 3.0-Ready and Certified
✅ Improved stability for overclocking
✅ Plug N Play at 4800MT/s

RM195.00

✅ Improved stability for overclocking
✅ Increased efficiency
✅ Intel XMP 3.0 Ceritified
✅ Plug N Play

RM539.00

HyperX HX426C16FB3/4 is a 512M x 64-bit (4GB) DDR4-2666 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components per module. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2666 at a low latency timing of 16-18-18 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:

RM139.00

HyperX HX426C16FB3/8 is a 1G x 64-bit (8GB) DDR4-2666 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2666 at a low latency timing of 16-18-18 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows: FACTORY TIMING PARAMETERS • Default (Plug N Play): DDR4-2666 CL16-18-18 @1.2V • XMP Profile #1: DDR4-2666 CL16-18-18 @1.2V

RM239.00

HyperX® FURY DDR4 RGB1 delivers a boost of performance and style with speeds of up to 3733MHz2, aggressive styling, and RGB lighting that runs the length of the module for smooth and stunning effects. This dazzling, cost-effective upgrade is available in 2400MHz–3733MHz speeds, CL15–19 latencies, single module capacities of 4GB–32GB, and kit capacities of 16GB–128GB. It features Plug N Play automatic overclocking at 2400MHz and 2666MHz speeds and is both Intel XMP-ready and Ready for Ryzen. HyperX FURY DDR4 RGB stays cool with its stylish, low-profile heat spreader. 100% tested at speed and backed by a lifetime warranty, it’s an easy, worry-free upgrade for your Intel or AMD-based system.

RM419.00

HyperX® FURY DDR4 RGB1 delivers a boost of performance and style with speeds of up to 3733MHz2, aggressive styling, and RGB lighting that runs the length of the module for smooth and stunning effects. This dazzling, cost-effective upgrade is available in 2400MHz–3733MHz speeds, CL15–19 latencies, single module capacities of 4GB–32GB, and kit capacities of 16GB–128GB. It features Plug N Play automatic overclocking at 2400MHz and 2666MHz speeds and is both Intel XMP-ready and Ready for Ryzen. HyperX FURY DDR4 RGB stays cool with its stylish, low-profile heat spreader. 100% tested at speed and backed by a lifetime warranty, it’s an easy, worry-free upgrade for your Intel or AMD-based system.

RM219.00

 

HyperX HX432C16FB3/8 is a 1G x 64-bit (8GB) DDR4-3200 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-3200 at a low latency timing of 16-18-18 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:

RM249.00

HyperX HX432C16FB3/16 is a 2G x 64-bit (16GB) DDR4-3200 CL16 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-3200 at a low latency timing of 16-18-18 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. 

RM329.00

HyperX® FURY DDR4 RGB1 delivers a boost of performance and style with speeds of up to 3733MHz2, aggressive styling, and RGB lighting that runs the length of the module for smooth and stunning effects. This dazzling, cost-effective upgrade is available in 2400MHz–3733MHz speeds, CL15–19 latencies, single module capacities of 4GB–32GB, and kit capacities of 16GB–128GB. It features Plug N Play automatic overclocking at 2400MHz and 2666MHz speeds and is both Intel XMP-ready and Ready for Ryzen. HyperX FURY DDR4 RGB stays cool with its stylish, low-profile heat spreader. 100% tested at speed and backed by a lifetime warranty, it’s an easy, worry-free upgrade for your Intel or AMD-based system.

RM469.00

HyperX® FURY DDR4 RGB1 delivers a boost of performance and style with speeds of up to 3733MHz2, aggressive styling, and RGB lighting that runs the length of the module for smooth and stunning effects. This dazzling, cost-effective upgrade is available in 2400MHz–3733MHz speeds, CL15–19 latencies, single module capacities of 4GB–32GB, and kit capacities of 16GB–128GB. It features Plug N Play automatic overclocking at 2400MHz and 2666MHz speeds and is both Intel XMP-ready and Ready for Ryzen. HyperX FURY DDR4 RGB stays cool with its stylish, low-profile heat spreader. 100% tested at speed and backed by a lifetime warranty, it’s an easy, worry-free upgrade for your Intel or AMD-based system.

RM239.00

HyperX HX434C16FB3/8 is a 1G x 64-bit (8GB) DDR4-3466 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-3466 at a low latency timing of 16-18-18 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers.

RM239.00

✅Stunning RGB lighting with aggressive style1
✅Patented Kingston FURY Infrared Sync Technology™
✅Intel® XMP-ready
✅Ready for AMD Ryzen™
✅Speeds up to 3733MT/s* and kit capacities up to 128GB
✅Plug N Play functionality at 2666MT/s2

RM195.00

✅Total Capacity: 16GB (1x16GB)
✅Memory Profile: 5200MHz 40-40-40 1.25V
✅Part Number: KF552C40BB-16Spec Sheet 
✅Capacities: Singles 16GB
✅Frequencies: 4800MHz, 5200MHz, 5600MHz, 6000MHz
✅Latencies: CL38, CL40
✅Voltage: 1.1V, 1.25V, 1.35V
✅Operating temperature: 0°C to 85°C
✅Dimensions: 133.35 mm x 34.9 mm x 6.62 mm

RM699.00

ValueRAM's 2G x 64-bit (16GB) DDR4-2400 CL17 SDRAM (Synchronous DRAM), 2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. This 260-pin DIMM uses gold contact fingers.

RM299.00